A bar having a wing-shaped cross section has been greatly improved in aesthetics, mountability of attachment
Low Profile Design
A stylish look made possible by lowering the bar height to the limit *Except for XS250
End garnish (Through type)
Chrome plating end garnishing
Aeroshaped Cross Bar
EZ-slide Plastic Coated & Non-cut Trim
To fix the mounting bolts, just remove the stay cover, insert them into the T-slot, and slide.
Scratch resistant coating bar
Torque knob (XS200/400/250/450)
Prevent over tightening.
Dimension of Aero Base Bar
Wider capacity for multiple attachments use (Through Type)
Installation range is 225~300mm wider than its Flush Type.
FLUSH TYPE
AERO BASE STAY FOR RAISED RAIL
XS100/Black
Max.Load 75kg
Stay height 32mm. Set of 4.
For cars with roof rails.
Bar extrusion is eliminated to create a sense of unity.
Attachment and removal have been tremendously improved with the double thread screws which advance twice as fast as normal screws with just one rotation.
A completely internalized design removing the need for cutting or mounting rubber plugs (bar upper and lower). Mounting lever/knob does not require tools.
THROUGH TYPE
AERO BASE STAY FOR RAISED RAIL
XS150/Black
Max.Load 75kg
Stay height 32mm.
Set of 4
For cars with roof rails.
Chrome plating end garnishing
FLUSH TYPE
AERO BASE STAY FOR SMOOTH ROOF
XS201/Black
Max.Load 75kg
Stay height 73mm. Set of 4.
Requires the appropriate Fit Kit (sold separately)
Bar extrusion is eliminated to create a sense of unity.
A completely internalized design removing the need for cutting or mounting rubber plugs (bar upper and lower). Mounting lever/knob does not require tools.
Comes with a torque knob which prevents over tightening and under tightening by turning freely when the appropriate torque is reached.
THROUGH TYPE
AERO BASE STAY FOR SMOOTH ROOF
XS250/Black
Max.Load 75kg
Stay height 108mm.Set of 4
Requires the appropriate Fit Kit (sold separately)
Chrome plating end garnishing
Comes with a torque knob which prevents over tightening and under tightening by turning freely when the appropriate torque is reached.
FLUSH TYPE
AERO BASE STAY FOR FIXED POINT
XS300/Black
Max.Load 75kg
Stay height 56mm. Set of 4.
Requires the appropriate Fit Kit (sold separately)
Bar extrusion is eliminated to create a sense of unity.
A completely internalized design removing the need for cutting or mounting rubber plugs (bar upper and lower). Mounting lever/knob does not require tools.
This type is to be fixed at the mounting section provided on the car.
When the carrier is not used, the stay can be removed using the knob with the mounting hook left on the roof. (With the base cover for covering the mounting hook left on the roof.)
FLUSH TYPE
AERO BASE STAY FOR FLUSH RAIL
XS400/Black
Max.Load 75kg
Stay height 45mm. Set of 4.
Requires the appropriate Fit Kit (sold separately)
Bar extrusion is eliminated to create a sense of unity.
A completely internalized design removing the need for cutting or mounting rubber plugs (bar upper and lower). Mounting lever/knob does not require tools.
Comes with a torque knob which prevents over tightening and under tightening by turning freely when the appropriate torque is reached.
THROUGH TYPE
AERO BASE STAY FOR FLUSH RAIL
XS450/Black
Max.Load 75kg
Stay height 45mm.Set of 4
Requires the appropriate Fit Kit (sold separately)
Chrome plating end garnishing
Comes with a torque knob which prevents over tightening and under tightening by turning freely when the appropriate torque is reached.
AERO BASE BAR/Black
XB85 Full length : 850mm A pack of 1 bar
XB93 Full length : 925mm A pack of 1 bar
XB100 Full length: 1000mm A pack of 1 bar
XB108 Full length: 1075mm A pack of 1 bar
XB115 Full length: 1150mm A pack of 1 bar
XB123 Full length: 1225mm A pack of 1 bar
XB130 Full length: 1300mm A pack of 1 bar
XB138 Full length: 1375mm A pack of 1 bar
XB145 Full length: 1450mm A pack of 1 bar
XB153 Full length: 1525mm A pack of 1 bar
XB160 Full length: 1600mm A pack of 1 bar
Dimentions:W80mmxH28mm
Scratch resistant
Blasted black finish
Aeronautical design bar & Low profile Stay
The mold for filling the T-SLOT has double structures, the elastic base section and the slippery surface, which simplifies the positioning of the mounting bolts.
To fix the mounting bolts, just remove the stay cover, insert them into the T-SLOT, and slide.
FORK LOCK FOR AERO BASE
XA391/Black
Max.Load 15kg(1 bike)
A stylish installation is assured with the unexposed mounting bracket located under the bar.
The special attachment can be mounted to the T-SLOT equipped with the AERO BASE BAR.
T-slot mounting
Able to be mounted to the general quick release cars with an a fork width of 100mm and an axle shaft of 9mm.
Compatible with disc brakes.
Full spec. model supporting both road and mountain bikes.
With a key lock
Adaptive tire size: 20 to 29 inches
Adaptive tire width: 18c to 2.7 inches
SUP/BOARD/KAYAK LOCKER FOR AERO BASE
XA445/Balck
Capacity
CANOE / KAYAK : 1
SHORT SURFBOARD : 3
LONG SURFBOARD / SUP / SAILBOARD : 2
Multi-attachment with a lock enables loading kayaks/canoes/surfboards.
The special attachment can be mounted to the T-SLOT equipped with the AERO BASE BAR.
A stylish installation is assured with the unexposed mounting bracket located under the bar.
T-slot mounting
INNO original crane system keeps straps floating in perfect position for loading ratchet mechanism
SHAPER 80 FOR AERO BASE
XA568/Black
Product Weight : 6.7kg Max.Load : 50kg
Exterior Dimensions : 1,185x830x75mm
Interior Dimensions : 1,050x760x55mm
The special attachment can be mounted to the T-SLOT equipped with the AERO BASE BAR.
A stylish installation is assured with the unexposed mounting bracket located under the bar.
SHAPER 100 FOR AERO BASE
XA569/Black
Product Weight : 7.9kg Max.Load : 50kg
Exterior Dimensions : 1,185x1,065x75mm
Interior Dimensions : 1,050x1,000x55mm
The special attachment can be mounted to the T-SLOT equipped with the AERO BASE BAR.
A stylish installation is assured with the unexposed mounting bracket located under the bar.
GRAVITY FOR AERO BASE
XA927/Black
Product Weight :2.6kg
Height adjustment is available to prevent the binding from interfering with the roof.
Capacity:6 Skis or 4 Snowboards
The special attachment can be mounted to the T-SLOT equipped with the AERO BASE BAR.
A stylish installation is assured with the unexposed mounting bracket located under the bar.